The quality of processed cheeses and cheese analogues the same brand domestic and foreign production
Keywords:processed cheese, cheese analogues
Processed cheeses belong to Slovakia favorite dairy products. Processed cheeses are made from natural cheeses. In recent years the trend is to replace natural cheeses with other raw materials of non-dairy nature. The composition of the processed cheese analogues is not in many countries defined by legislation. The objective of this study was to determine and compare chemical properties (fat, dry matter, fat in dry matter, NaCl) two samples of processed cheeses (C, D - Veselá krava) and two samples cheese analogues (A, B - Kiri) the same brand domestic and foreign production. The evaluated was taste of processed cheeses and cheese analogues, too. Chemical analysis and sensory analysis were repeated four times. The results of chemical analysis shows that all rated samples processed cheeses made on Slovakia fulfilled demands declared (dry matter and fat in dry matter) as producers provided on the label. The most commonly fluctuate content of NaCl from 1 to 1.24 g.100g-1. The higher coefficient of variation in the determination of NaCl (3.88%) was found in processed cheeses made in France. Processed cheese and cheese analogues made in France had not specified parameters for dry matter and fat in dry matter on the label. For production cheese analogues Kiri made in Slovakia was used different raw material than Kiri made in France. The taste of products was determined by descriptors - salty, slightly sweet, milky, buttery-creamy, fatty, sour, bitter, and unknown. The interesting that Kiri made in Slovakia had stronger milky and buttery-creamy taste than cheese analogue Kiri made in France. Significant differences were found in the slighty sweet taste of processed cheeses, the most points won processed cheese Veselá krava made in Slovakia.
Bachmann, H-P. 2001. Cheese analogues: a review. International Dairy Journal, vol. 11, p. 505-515. https://doi.org/10.1016/S0958-6946(01)00073-5
Cunha, C. R., Dias, A. I., Viotto, W. H. 2010. Microstructure, texture, colour and sensory evaluation of a spreadable processed cheese analogue made with vegetable fat. Food Research International, vol. 43 p. 723-729. https://doi.org/10.1016/j.foodres.2009.11.009
Cvak, Z., Petráková, Ľ., Černá, E. 1992. Chemical and physico - chemical methods in quality control of milk and dairy products. Praha: Výskumný ústav potravinářský, 1992, 221 p., ISBN 80-85120-36-4.
Dostálová, J. 2005. Nutrition recommendations Nutrition Society for the population of the Czech Republic. Potravinářská revue, roč. 1, 2005, p. 17-19. ISSN 1801-9102.
Guinee, T. P., Caric, M., Kaláb, M. 2004. Pasteurized processed cheese and substitute/imitation cheese products. Cheese: Chemistry, physics and microbiology. 3er ed. vol. 2, London, UK: Elsevier Applied Science, p. 349-394). ISBN: 0-1226-3653-8.
Guinne, T. P. 2011. Cheese/Pasteurized processed cheese products. Encyklopedia of Dairy Sciences, 2nd ed. p. 805-813. https://doi.org/10.1016/B978-0-12-374407-4.00095-9
Hanaei, F., Cuvelier, G., Sieffermann. 2015. Consumer texture descriptions of a set of processed cheese. Food Quality and Preference, vol. 40, p. 316-325. https://doi.org/10.1016/j.foodqual.2014.05.018
Horčin, V. 2002. Sensory evaluation of food. Nitra: SPU, 2002, 139 p. ISBN 80-8069-112-6.
Hougaard, A. B., Sijbrandij, A. G., Varming, C., Ardö, Y., Ipsen, R. 2015. Emulsifying salt increase stability of cheese emulsions during holding. LWT - Food Science and Technology, vol. 62, p. 362-365. https://doi.org/10.1016/j.lwt.2015.01.006
ISO Standard No. 3433. 2008. Cheese - Determination of fat content - Van Gulik method. Geneva: International Organization for Standardization.
ISO Standard No. 5534. 2004. Cheese and processed cheese - Determination of the total solids content (reference method). Geneva: International Organization for Standardization.
Kapoor, R., Metzger L. E. 2008. Process cheese: Scientific and technological aspects - a review. Comprehensive Reviews in Food Science and Food Safety, vol. 7, no. 2, p. 194-214. https://doi.org/10.1111/j.1541-4337.2008.00040.x
Nagyová, G., Buňka, F., Salek, R. N., Černíková, M., Mančík, P., Grůber, T., Kuchař, D. 2014. Use of sodium polyphosphates with different linear lengths in the production of spreadable processed cheese. Journal Dairy Science, vol. 97, p. 111-122. https://doi.org/10.3168/jds.2013-7210 PMid:24239073
Panovská, Z., Valentová, H., Drobná, Z., Šedivá, A. 2001. Comparing preferences fat and low-fat process ed cheese. Sborník přednášek semináře “Mléko a sýry 2001”, Praha: VŠCHT, p. 129-132. ISBN 80-86238-12-1.
Salek, R. N., Čeríková, M., Nagyová, G., Kuchař, D., Bačová, H., Minarčíková, L., Buňka, F. 2015. The effect of composition of ternary mixtures containing phosphate and citrate emulsifying salts on selected textural properties of spreadable processed cheese. International Dairy Journal, vol. 44, p. 37-43. https://doi.org/10.1016/j.idairyj.2014.12.009
Soɫowiej, B., Cheung, I. W. Y., Li-Chan, E, C. Y. 2014. Texture, rheology and meltability of processed cheese analogues prepared using rennet or acid casein with or without added whey proteins. International
Dairy Journal, vol. 37, no. 2, p. 87-94. https://doi.org/10.1016/j.idairyj.2014.03.003
Vojtaššáková, A., Kováciková, E., Holčíková, K., Simonová, E. 2000. Table food - milk and eggs. Bratislava: ÚVTP, 2000, 188 s., ISBN 80-85330-76-8.
Zachar, D. 2008. Human nutrition I. Zvolen: Technická univerzita, 2nd ed., 2008, 357 s. ISBN 978-80-228-1869-8.
How to Cite
LicenseAuthors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).