Features of heat transfer in the environment when it is sprayed with rotary rollers
Keywords:dough, injection, heat conduction, heat propagation, heat flux, roll, phase, medium
The analytical analysis of roller impact on the medium and its behaviour at deformation influences are carried out, ways of choosing an optimal variant of the process for providing the maximum or minimum value of parameters (criterion) are proposed. The physical essence of the equation of energy flows of the intensity of deformation of the mass of the medium, which depends on the method of applying mechanical forces, the degree of its previous dispersion (recipe) and its physical and mechanical properties, is considered. For a more visual view and understanding of the overall performance of the research, a scheme of causal relationships between the medium and the roll, which determine the temperature change of the dough injection process, is proposed. It is noted that the determination of the influence of the temperature of deformation processes during the passage of the process of injection of the medium by roller working bodies plays an important role for calculations of the design of molding, roll-over equipment. The influence of thermal circulatory chaotic streams is considered, the character of which also leads to violations of the general heat circulation in the medium during the injection. At the same time, the level of such violations may be sufficiently deep with changes in the directions in their contours that influence the process, according to each particular period of the deformation stage in the injection site of the molding machine. Partly revealed methods for determining the change in temperature fluxes in the dough and on the surface of the roll. On the basis of which the change of the energy potential in the interaction of the viscous medium with rotating roller working bodies in the molding machine is considered. An exchange of energy between moving particles is discovered due to collisions of molecules of a more heated part of the body with a greater energy and the transfer of the energy particle to adjacent particles with less energy. It is noted that the definition of temperature fluxes during the process of injection of the medium by roller working bodies plays an important role in calculating the design of molding, roll-over, mixing equipment. The obtained data answer a number of questions about the possibility of thermoregulation of the process of the work of the working bodies into the environment.A set of measures for measuring the temperature during the use of devices was carried out. On the basis of their data, a real temperature change in the roller unit of the molding machine is considered, with a comparative analysis of existing ones with a newly designed design. The change of the energy potential in the interaction of the viscous medium with rotating roller working bodies in the molding machine is considered. An exchange of energy between moving particles is discovered due to collisions of molecules of a more heated part of the body with a greater energy and the transfer of the energy particle to adjacent particles with less energy. It is noted that the definition of temperature fluxes during the process of injection of the medium by roller working bodies plays an important role in calculating the design of molding, roll-over, mixing equipment. The obtained data answer a number of questions about the possibility of thermoregulation of the process of the working bodies into the environment. The essence of formation of temperature fluxes is revealed and the method of their determination in a roller assembly of a molding machine with a comparative analysis of existing ones with a newly designed design is proposed.
Bloksma, A. Niemann, W. 1975. The effects of temperature on some rheological propertits of wheat flour doughs. Journal of Texture studies, vol. 6, no. 3, p. 343-361. https://doi.org/10.1111/j.1745-4603.1975.tb01130.x
Derkach, A., Stadnyk, I., Sukhenko, B., Vasiliev, V. 2017. Methodology determination of temperature flows in the zone of action of valveworking swaths. Food Industry of Agriculture, vol. 1-44, no. 3. р. 19-23.
Derkach, A., Stadnyk I., Vitenko, T. 2016. Simulation of components mixing in order to determine rational parameters of working bodies. Advances in Science and Technology Research Journal, vol. 9., p. 130-138. https://doi.org/10.12913/22998624/64068
Khamis, M. 2014. Characterization and Evaluation Of Heat Treated Wheat Flours: dissertation theses. Manhattan, Kansas: Kansas State University. 160 p. Available at: https://core.ac.uk/download/pdf/33353737.pdf
Kozlov, G., Brazhnik, M., Pshenishnjuk, G. 1984. Influence of the dough deformation while kneading on its rheological properties. Izvestiya Vuzov, Food Technology, vol. 3. p. 39-41.
Lytovchenko, I., Lisovenko, О. 1983. Determination of energy consumption for heating the dough while kneading.
Bakery and Confectionery Industry, vol. 8. р. 28-30.
Muratova, E., Smolihina, P. 2015. Reologiya konditerskih mass: monografiya: Russia, Orel University, vol. 6, p. 188.
Nikolaev, B. A. 1976. Measuring of structural and mechanical properties of flour dough. Moscow : Pishchevaya Promyshlennost (Food Industry), 246 p.
Obolkina, V., Skrypko, A., Kyianytsia, S., 2016. The scientific approach to the creation of technologies pastry recreational purposes using flour with malt oats. Food industry, vol. 19, p. 73-78. Available at: http://nbuv.gov.ua/UJRN/Khp_2016_19_16
Kenneth, J. V., Rotstein, E., Singh, R. P. 1997. Handbook of food engineering practice. United States : CRC Press. 736 p. ISBN: 9780-8493-86947.
Shurchukova, U., Radchenko, O. 2013. Theoretical study of hydrodynamic and heat transfer processes occurring in the channel of the pre-matrix and matrix zones of the extruder. Scientific Wworks of Odessa National Academy of Food Technologies. vol. 43, no. 2, p.7-10. Available at: http://nbuv.gov.ua/UJRN/Np_2013_43%282%29__4
Sokolenko, A., Mazaraki, O., Piddubnuy, V., et al. 2012. Energy transformations and energy saving in food technologies.monograph. Kiev, Ukraine : Phoenix, 484 p.
Sokolenko, А., Shevchenko, О., Piddubnuy, V., 2008. Intensification of mass-exchange processes in food technologies: Kiev, Ukraine : Luxar, 443 p.
Stadnyk, I., Novak, L, Matenchuk, L. 2018, Global rheological approach tothe quality of medium injected by the rollers. Potravinarstvo Slovak Journal for Food Sciences, vol. l1, no. 1, p. 234-245. https://doi.org/10.5219/867
Stadnyk I., 2013. Scientific and technological bases of processes and development of equipment for loosely mixing of dough: dissertation theses. Kyiv, Ukraine: National University of Food Technologies, 40 p. Available at: www.elartu.tntu.edu.ua/bitstream/lib/20799/1/Monohrafiya_Stadnyk.pdf
How to Cite
LicenseAuthors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).